| Vacuum Chamber Pump Oil (Item #646-625) Replaces the oil in your vacuum chamber pump. One quart of fluid. Don't ruin a $900 pump by trying to save $3 on oil
|
| Vacuum Chamber Pump Oil (gallon) (Item #646-633) . Replaces the oil in your vacuum chamber pump. Check the sight glass on your Vacuum pumps regularly! If the oil appears milky or if your pump doesn't appear to be pumping at full speed - it probably needs changing. There's a drain plug under the pump. This is especially more important in warm areas with high humidity where the humidity gets into the oil. Don't ruin a $900 pump by trying to save $15 on oil
|
| 11" x 11" x 5/8" Spacer Plate (Item #646-634) Used for raising the level of the bags in a Vacuum Chamber Sealer.
|
| Circuit board for Vacuum Machine 646-600 (Item #646-635) For 220 v.a.c. machines
|
  | Circuit Board for 16" & 20" Vacuum Machine (Item #646-655) For 110 & 220 v.a.c. machines Click on image for larger image. Has total of 14 pins.
|
 < | Circuit Board decal for 16" & 20" Vacuum Machine (Item #646-654) For 110 & 220 v.a.c. machines Also fits some DZ400 &500 Single Chamber Vacuum Machines
|
 | Vacuum Sealer Kit 16in. (Item #646-613) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. For the 400 sealers. Fits sealers with a 16" bar. Will fit on Item #646-629, #646-700, #646-701, #646-610
|
|
| Vacuum Sealer Kit 20in. (Item #646-614) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. For the 500 sealers. Fits sealers with a 20" bar. Will fit on Item #646-667, #646-703, #646-702, #646-611, #646-609, #646-606, #646-605.
|
|
| Vacuum Sealer Kit 24" (Item #648-005) This is a replacement kit for the burner tape and metal strip on the vacuum sealer. For the 600 sealers. Fits sealers with a 24" bar. Will fit on Item 646228
|
|
| Vacuum Sealer Kit for dual chamber 20" (Item #646-693) This is a replacement kit for the burner tape and metal strip on the dual chamber vacuum sealer. Fits dual chamber sealers with 20" sealer bars. Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646-605. has wider tape.
|
NEW! | Vacuum Sealer Kit for dual chamber 20" Narrow (Item #646-729) This is a replacement kit for the burner tape and metal strip on the dual chamber vacuum sealer. Fits dual chamber sealers with 20" sealer bars. Comes with 2 burner tapes and 2 metal strips. Will fit on Item #646605. has wider tape. This heat strip width is only 8mm vs. 10mm on the standard sealer bars. This narrower strip is designed to seal 5 mil. bags quicker with less heat so they will last longer. Test them and arrive at your custom settings on these new strips.
|
| Split Bolt for Heat Strip 6mm x 6mm (Item #646-692) For Commercial Vacuum Sealers. Body of bolt is 6mm or 1/4" which is smaller than most.
|
  | Vacuum Sealer Lid Gasket (Item #646-616) This is the gasket for the lid on the vacuum sealer. Fits our sealers with a 16" bar. 6mmx8mm .244"x.338 May also fit some of the DZ-400 sealers.
|
|
| Vacuum Sealer Lid Gasket (Item #646-617) This is the gasket for the lid on the vacuum sealer. Fits our sealers with a 20" bar. May also fit some of the DZ-500 sealers. May also fit some Dual Chamber Machines, check the thickness. 6mmx8mm .26"x.338"
|
|
| Vacuum Sealer Lid Gasket (Item #646-618) This is the gasket for the lid on the vacuum sealer. Fits our sealers with a 24" bar. 6mmx8mm .244"x.338" 94"+ long May also fit the DZ-600 sealers.
|
  | Sealer Gasket for 20" Dual Chamber Vacuum Machine (Item #646-595) This gasket sealer fits some Dual Chamer Vaccum machines. 12.94mmx15.38mm approximately 84" long
|
| Lid Switch for Vacuum Sealer (Item #637-014) Used to turn on Vacuum Sealer.
|
| Roller Switch for Dual Chamber Lid (Item #646-678) 220 volt, 5 amp.
|
|
| Bearing for Dual Chamber Vacuum Machine Arm (Item #646-685) 32mm X 15mm X 9mm For most dual chamber vacuum machines from ProProcessor and also for DZ500 dual chambers
|
| Lid For 16" Vacuum Chamber Machine (Item #646-670) Measures 19" x 21"
|
|
| Lid For 16" Vacuum Chamber Machine (Item #646-691) Measures 18.25" x 18.5" Includes sealer strip Fits some DZ-400 vacuum sealing machines - Check measurements
|
| Vacuum Sealer Spring Bar Kit for 16" or 20" Vacuum Sealer (Item #646-695) This is a replacement kit for the spring bar that holds up the lid on the 16" vacuum chamber sealer machine.
|
| Lid For 20" Vacuum Chamber Machine (Item #646-671) Measures 22.75" x 25.5"
|
|
| Lid For 24" Vacuum Chamber Machine (Item #646-728)
|
| Vacuum Sealer Hinge Kit for 16" Vacuum Sealer (Item #646-694) This is a replacement kit for the hinges on the 16" vacuum chamber sealer.
|
 | Vacuum Sealer Spring for 16" & 20" Vacuum Sealer lid catches (Item #646-697)
|
| Letters for Vacuum Machine (Item #646-646) Can be used to impress codes, dates, etc on each bag as you seal it.
|
| Pillow for 16" chamber Vacuum Machine. (Item #646-689) Used to raise sealer bar to make seal. 12" long. If your seals are spotty or almost non-existant, it's either the pillow or the air valve that feeds it.
|
|
| Pillow for 20" chamber Vacuum Machine. (Item #646-690) Used to raise sealer bar to make seal. 14" long. If your seals are spotty or almost non-existant, it's either the pillow or the air valve that feeds it.
|
 
| Sealerbar for 16" Dual chamber Vacuum Machine. Complete with heat strip, tape and bolts (Item #646-720) Also fits DZ-400 dual chamber machines.
|
 
| Sealerbar for 16" Single Chamber Vacuum Machine. Complete with heat strip, tape and bolts (Item #646-721) Also fits DZ-400 single chamber machines.
|
|
| Sealerbar for 20" Dual chamber Vacuum Machine. (Item #646-722) Complete with heat strip, tape and bolts There are different dual chamber vacuum chamber machines on the market. Check carefully if they conform to these bars. These have one hole in the center to pivot on. 19.75" length. Also fits DZ-500 dual chamber machines.
|
|
| Sealerbar for 20" Single Chamber Vacuum Machine. Complete with heat strip, tape and bolts (Item #646-723) Also fits DZ-500 single chamber machines.
|
| Sealer Bar for VacMaster VP210-215 (Item #648-006) VacMaster® replacement seal bar for the VP210 and VP215 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
|
| Sealer Bar for VacMaster VP300-325 (Item #648-007) VacMaster® replacement seal bar for the VP300 and VP325 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
|
| Sealer Bar for VacMaster VP321-322 (Item #648-008) VacMaster® replacement seal bar for the VP321 and VP322 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
|
| Sealer Bar for VacMaster VP540-545 (Item #648-009) VacMaster® replacement seal bar for the VP540 and VP545 VacMaster Chamber Sealers. Should be replaced at least every 5 years. Easy to install.
|
| 20" Sealer Strip for Vacuum Machine. It has holes on one side for the letter and number pins. (Item #646-645) Works with 646-646 letters and numbers for coding bags.
|
| Transformer for circuitboard will also fit
300, 400, 500 (Item #646-632) For 220 v.a.c. machines
|
| Transformer DZ300 (Item #646-666) Transformer for single heat strip DZ300 220 Volt. For 220 v.a.c. machines
|
| 220 Transformer Vacuum Sealers W/ 20" Double Sealer Bars (Item #646-664) Transformer for single and dual chamber vaccuum sealers. Will aslso fit DZ 500 SE & DZ500 SE2 Vaccum Chamber Sealers. For 220 v.a.c. machines
|
| Vacuum Chamber Valve (Item #646-657) For 220 v.a.c. machines 2" x 2" x 4"
|
| Vacuum Chamber Valve (Item #646-658) 2" x 2" x 4.5" For 220 v.a.c. machines
|
| Vacuum Chamber Valve (Item #646-659) 2" x 1.5" x 7.5" For 220 Volt machines
[an error occurred while processing this directive]
Bennefits of Commercial Dual Chamber Vacuum Machines / Dual Chamber Vacuum SealersGain a competitive advantage by using dual chamber vacuum machines. Keep three people busy with this machine. Our double chamber vacuum machines allows you to set the vacuum time, sealing time, and the sealing temperature. With this dual vacuum sealer you can do thousands of bags. Just lay the bagged product with the open end on the sealer bar then close the lid...that easy. The vacuum machine starts automatically and completes the full cycle of vacuuming and sealing within seconds while you are filling the other chamber for the next cycle.Please note that with thes powerful dual chamber vacuum sealers you must have at least 220 Volts.Click here to goto the Double Chamber Machine Product PageEasy driving distance from San Antonio, Dallas - Fort Worth, Corpus Christi, Austin, Waco and Houston, Texas. We are a one to two hours drive from these other fine Texas communities too: Seguin, Fredericksburg, Kerrville, New Braunfels, Flatonia, El Campo, Victoria, Needville, Hallettsville, Conroe, Schulenburg, Weimer, Huntsville, Sugarland, Pasadena, Rosenberg, Bellville, Fayetteville, Katy, College Station, Bastrop, Warrenton, Sealy, LaGrange, Brenham, Cypress, Wharton, Rosenberg and The Woodlands.
|
.jpg "Vacuum Chamber Contactor")
with cover
.jpg "Vacuum Chamber Contactor")
without
