 Will not fit Cabela's Stuffer | O Ring for 20-40 Lb sausage stuffer from ProProcessor (Item #700-254) Also fits 30 lb. electric sausage stuffer
|
 | Stop Switch for 30 lb. Electric Sausage Stuffer (Item #699-330)
|
 | Large Gear for 30lb Electric Sausage Stuffer (Item #340-016) 4.87" o.d. .9" i.d. .25" keyway
|
 | Face Plate for Sausage Stuffer (Item #610-535)
|
 | Gear Box for Sausage Stuffer (Item #610-536)
|
 | Motor and Gear for Sausage Stuffer (Item #610-537)
|
 | Foot Switch for Sausage Stuffer (Item #700-270) For 610534
|
 **Like getting 1 tube FREE!** | Fits All ProProcessor Hydraulic Sausage Stuffers 3 Piece Stainless Steel Sausage Stuffer Tube Set (Item #699-926) 3 piece stainless steel tube set for pro processor hydraulic sausage stuffers 699-679 , 600-900, 600-555, 600-901, 600-556, 600-902. Sizes 1 1/4" - 3/4" - 1/2". Has 2 9/16" flange and are 8 1/2" total length! Very stoutly made!
|
|
**Like getting 1 tube FREE!** | Fits All ProProcessor Hydraulic Sausage Stuffers 3 Piece Stainless Steel Sausage Stuffer Tube Set (Item #699-927) 3 piece stainless steel tube set for hydraulic sausage stuffer #699-679 , 600-900, 600-555, 600-901, 600-556, 600-902. Sizes 1 1/2" - 1" - 3/4". Very stoutly made! Flange is 2.55" O.D.
|
| Fits All ProProcessor Hydraulic Sausage Stuffers, 3 Piece Stainless Steel Sausage Stuffer Tube Set (Item #618-516) 3 piece stainless steel stuffing tube set for hydraulic sausage stuffer #699679. Also fits 600555, 600556, 600900, 600901, & 600902. Sizes 3/4"- 1" - 1/2". Very stoutly made!
|
|
| Fits All ProProcessor Hydraulic Sausage Stuffers, 3 Piece Stainless Steel Tube Set (Item #700-117) This 3 piece stainless steel stuffing tube set is for our hydraulic ProProcessor sausage stuffer and also fits 600555, 600556, 600900, 600901, & 600902. Sizes 1", 3/4" and 5/8" Very stoutly made! Flange is 2.55" O.D.
|
| Hydraulic Stainless Steel Sausage Stuffing Tube Set Long (Item #618-515) Stainless Steel Stuffing Tube set includes 2 tubes measuring 12" long and is 20mm and 30mm in diameter. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D. <
|
| Hydraulic Sausage Stuffing Tube made of Stainless Steel 3/8" (Item #618-500) Stainless Steel Stuffing Tube 3/8" or 10 mm in diameter and 7" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Use only with very WET or LOW density meat. Flange is 2.55" O.D.
|
|
| Hydraulic Sausage Stuffing Tube made of Stainless Steel (Item #618-505) Stainless Steel Stuffing Tube 1/2" or 12 mm in diameter and 7" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D.
|
| Hydraulic Sausage Stuffing Tube made of Stainless Steel (Item #618-507) Stainless Steel Stuffing Tube 3/4" or 20 mm in diameter and 7" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D.
|
|
| Hydraulic Sausage Stuffer Tube made of Stainless Steel (Item #618-506) Tube in diameter is 5/8" or 15 mm and is 7" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer.Flange is 2.55" O.D.
|
| Hydraulic Sausage Stuffer Tube made of Stainless Steel (Item #618-508) Tube in diameter is 1" or 25 mm and is 7" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D.
|
| Hydraulic Sausage Stuffing Tube made of Stainless Steel (Item #618-501) Stainless Steel Stuffing Tube 1.5" or 40 mm in diameter and 7" long. These tubes are made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D. <
|
| Hydraulic Sausage Stuffing Tube made of Stainless Steel (Item #618-519) Stainless Steel Stuffing Tube 2" or 51 mm in diameter and 7" long. These tubes are made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D. <
|
| Hydraulic Sausage Stuffer Tube made of Stainless Steel (Item #618-509) Stainless Steel Stuffing Tube 1.25" or 30 mm in diameter and 7" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D.
|
| Hydraulic Sausage Stuffer Tube made of Stainless Steel
(Item #618-513) Tube in diameter is 3/4" or 20 mm and is 12" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D.
|
| Hydraulic Sausage Stuffer Tube made of Stainless Steel (Item #618-514) Tube in diameter is 1 1/8" or 30 mm and is 12" long. This tube is made to fit the Pro Processor Hydraulic Sausage Stuffer. Flange is 2.55" O.D.
|
 | Silicone Spray (Item #645-707) Heat-stable silicone release agent for food packaging and processing equipment.
|
| Food Grade Machine Oil (Item #645-734)
|
| Portioner control for Proprocessor Hydraulic Sausage Stuffers (Item #698-124) Convert your ProProcessor Sausage to our new Portion Control (timer)Requires a rectangular hole cut into side of base on stuffer 5.125" wide by 3.375 high and some electrical skills.
|
| Sausage Stuffer Switch On - Off (Item #699-003) 6 screws Fits new Sausage stuffer w/ portion control and some older models too Maybe some others that only need on-off?
|
No longer Available Out of stock You can substitute 699428 for higher amperage but you will have to enlarge the opening where the former switch was located | Electric Switch 1-2 (Item #699-467) Has three settings, up, down, and off. Fits all of our hydraulic stuffers up to 2014. Has 20 screw connections. Blue part of switch measures 1.7" x 1.44" & face plate measures 1.9" x 1.9" 20 Amp Be sure to compare.
|
 
| 1-2 Switch (Item #699-430) For Hydraulic Sausage Stuffer Model starting in 2014, has 12 screws. Blue part of switch measures 2" x 2.3" & Face plate measures 2.5" x 2.5" 32 Amp Be sure to compare it to your present switch.
|
| Hydraulic Switch 1-2 Heavy Duty (Item #699-428) Heavy Duty switch for New ProProcessor 50lb. & 70lb. stuffer with reverse. Only switch that still has twenty screws on it. Mainly to mount on older machines. blue part measures 2.1" x 2.3" & face plate measures 2.5" x 2.5" 32 Amp - 20 screws
|
|
| 1-2 Switch (Item #699-431) For Hydraulic Sausage Stuffer Model:2014, has 12 screws. Should fit hydraulic stuffers made after 2013 Blue part measures 1.5" x 1.8" & face plate measures 2.5" x 2.5" 25 Amp Be sure to compare it to your present switch.
|
 | Hydraulic Sausage Stuffer Tube Nut (Item #699-451) This is a stuffer nut for our hydraulic sausage stuffers. Fits all ProProcessor Hydraulic Sausage Stuffers Will also fit the Chinese SF150, SF260 & SF350 Stuffers. Fits on threads w/ 2.75" O.D.
|
 | Pro Processor Lid Nut for Hydraulic Stuffer (Item #600-919) Will fit Pro Processor 30lb., 50lb., and 70lb.. Will also fit Hydraulic Sausage Stuffer SF150, SF260, SF350.
|
| Adjustable Valve Speed Control (Item #699-466) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| Hydraulic Stuffer Switch (Item #699-477)
|
| Hydraulic Socket Reverse Timer (Item #699-440) Socket for Reverse Adjustable Timer for 30lb., 50lb., and 70lb new model stuffer. (2013+)
|
| Reverse Timer for Hydraulic Stuffer (Item #699-442) Reverse Adjustable Timer to be used with (#699-440 above) Reverse Timer for 30lb., 50lb., and 70lb new model stuffer. (2013+) Fits both 110 and 220 volt machines
|
| Hydraulic Stuffer Relay Switch (Item #699-471) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| Socket Relay for Hydraulic Stuffer (Item #699-441)
|
| Hydraulic Stuffer Relay Switch (HD) & Socket (Item #699-426) Fits 30 - 50 - 70 lb hydraulic stuffers. Fits Jan 2014 and later. Notice difference in prongs. Wiring is different when replacing old type with new!
|
| Fuse for Hydraulic Sausage Stuffer (Item #699-443) Fuse for 30lb, 50lb, & 70lb Hydraulic Sausage Stuffers
|
 Simple instructions | Sausage Stuffer Reverse Kit (Item #699-444) Reverse Adjustable Timer Kit for 30lb., 50lb., and 70lb stuffers. this timer will stop meat continuing to run out of the nozzle on your SF150, SF260 & SF350 Hydraulic Sausage Stuffers? This kit will solve that problem. The timer will reverse the piston so that the meat will no longer come out after you release the knee switch. Your stuffer will now work similar to the ProProcessor Hydraulic stuffers that already have that feature!
|
| Hydraulic Stuffer Pump (Item #699-486) Universal pump fits 30-50-70lb. hydraulic stuffers.
|
 | Hydraulic Directional Valve Control
(Item #699-449) Includes both solenoids Fits all of our hydraulic stuffers.
|
| Adjustable Pressure Control (Item #699-468) Fits 30 - 50 - 70 lb hydraulic stuffers.
|
| 30-50-70lb. Hydraulic Stuffer Oil Manifold (Item #699-494) Oil Manifold fits 30-50-70lb. Hydraulic Stuffers.
|
| Hydraulic Stuffer Motor to pump adapter (Item #699-475)
|
| Hydraulic Stuffer Knee Switch (Item #699-472) This foot switch fits all of our Hydraulic Stuffers for easy and comfortable opperation. On the newer switches, the brown and blue are the switching wires and the black is for the case ground.
|
| Foot Switch with 30" Cord (Item #698-120) Can be used on stuffers and grinders that operate on 10 AMPS or less.
|
| Foot Switch (Item #370-092) Can be used on stuffers and grinders that operate on 10 AMPS or less. Red and White wires are normally closed. Black And white wires are normally open.
|
 | Hydraulic Stuffer Caster Fixed (Item #699-482) 4"H x 3"W. Wheel 2"H.
|
 | Hydraulic Stuffer Caster Swivel (Item #699-481) 4"H x 6"W. Wheel 2.5"H.
|
 | Hydraulic Stuffer Hose 21" (Item #699-488)
|
 | Hydraulic Stuffer Hose 33 in. (Item #699-487)
|
 | Fitting for hose connection to Hyd. Cylinder (Item #700-608)
|
 | Hydraulic Stuffer Pressure Gage (Item #699-489) Manufacturer recommends 80Kg/cm2 for max pressure on Proprocesssor and SF-150, 260, 350 Hydraulic Sausage Stuffers You probably will not want to run at that pressure because it may cause the motor to run hot. Use your judgement
|
 | Hydraulic Stuffer Transformer 24V (Item #600-917)
|
 | Hydraulic Stuffer Filter (Item #699-491)
|
| 110v Hydraulic Stuffer Motor (Item #699-483) Fits 30lb Hydraulic Stuffer.
|
| 30lb. Hydraulic Stuffer Capacitor (Item #699-478) 150 v. ac 400 mfd
|
| Hydraulic Sausage Stuffer Fan (Item #602-044) Will fit Pro Processor 30lb., 50lb., and 70lb. Hydraulic Sausage Stuffer. Fan is for cooling.
|
| Hydraulic Stuffer 20 AMP Breaker (Item #602-030) 20 AMP Breaker for 30lb. Hydraulic Stuffers with a 550 watt motor.
|
 | Hydraulic Stuffer 30lb Piston O-ring (1) (Item #699-458) Fits 30lb Hydraulic Sausage Stuffer #600-555 Each machine requires 3 o-rings - 2 on the piston and one in the lid. Will also fit the 30lb. SF15.
|
 | Hydraulic Sausage Stuffer 30lb Lid Ring (1)
(Item #699-453) Seals the top and bottom of the Stainless Steel Cylinder on the 30lb Hydraulic Sausage Stuffer #600-555
|
| O-ring for 30lb. Hydraulic cylinder (Item #602-038) 1.65" outer dimension.
|
|
| SS swivel lid 30lb stuffer (Item #618-431) Makes life so much simpler to just swivel the lid and not look for a place to put it!
|
| Aluminum Lid for 30lb Hydraulic Stuffer (Item #600-926)
|
 | Hydraulic Stuffer 30lb. Stainless Steel Lid (Item #600-903)
|
| 30lb.Hydraulic Stuffer Canister Stainless Steel (Item #600-920) Fits ProProcessor 30 lb. and SF150 Sausage Stuffers Approx. 7.75" i.d.
|
 | Hydraulic Stuffer 30lb.Piston (Item #699-460) Fits ProProcessor 30 lb. and SF150 Sausage Stuffers Approx. 7.75" i.d.
|
 | Hydraulic Stuffer 30lb. Piston Metal Base (Item #699-492) Metal Base for attaching plastic piston. Screws into top of hydraulic cylinder rod
|
| Hydraulic Cylinder for 30lb Stuffer (Item #699-496)
|
| Hydraulic Stuffer Piston Bolts (Item #699-462) Package of eight bolts will fit 30-50-70lb stuffer piston.
|
|
| 110v Hydraulic Stuffer Motor 1 HP (Item #699-470) Fits 50lb SF260 Hydraulic Stuffer from others and older ProProcessor 50 lb.stuffers.
|
|
| 110v Hydraulic Stuffer Motor (Item #699-484) Fits 70lb Hydraulic Stuffer and newer ProProcessor 50 lb. stuffers.
|
|
| Hydraulic Sausage Stuffer Fan (Item #602-044) Will fit Pro Processor 30lb., 50lb., and 70lb. Hydraulic Sausage Stuffer. Fan is for cooling.
|
|
| Hydraulic Stuffer 50lb Piston O-ring (1)
(Item #699-450) Fits Hydraulic Sausage Stuffer #699-679 Will also fit the 50lb. SF260. (piston requires 2 - lid requires 1)
|
|
| Hydraulic Sausage Stuffer 50lb Lid Ring (1)
(Item #699-452) Seals the top and bottom of the Stainless Steel Cylinder on the 50lb Hydraulic Sausage Stuffer #699-679
|
| 50 & 70lb. Hydraulic Stuffer Capacitor (Item #699-480) 150 V. ac 500 Mfd
|
|
| 30 AMP Breaker for Hydraulic Stuffer (Item #602-031) 30 AMP Breaker for 50lb. and 70lb. Hydraulic Stuffers with a 1100 watt motor.
|
|
| Hydraulic Stuffer 50lb. Stainless Steel Lid (Item #600-904)
|
|
| SS swivel lid 50lb stuffer (Item #618-432) Makes life so much simpler to just swivel the lid and not look for a place to put it!
|
|
| 50lb. Hydraulic Stuffer Aluminum Lid (Item #600-927)
|
|
| Hydraulic Stuffer Canister SS 50lb. (Item #600-921) Fits ProProcessor 50 lb. and SF260 Sausage Stuffers Approx. 10.25" i.d.
|
|
| Hydraulic Stuffer 50lb. Piston (Item #699-459) Fits ProProcessor 50 lb. and SF260 Sausage Stuffers Approx. 10.25" i.d.
|
 | Hydraulic Stuffer 50lb. Piston Metal Base (Item #699-476) Metal Base for attaching plastic piston. Screws into top of hydraulic cylinder rod Fits older hydraulic cylinder pre 2022. Threaded pin measures 7/8" O.D.
|
|
| Hydraulic Stuffer 50lb. Piston Metal Base (Item #602846) Metal Base for attaching plastic piston. Screws into top of hydraulic cylinder rod Fits newer hydraulic cylinder post 2021 . Threaded pin measures 1" O.D.
|
|
| Hydraulic Cylinder for 50lb or 70lb Stuffer (Item #699-495)
|
| Hydraulic 50 - 70 lb. Sausage Stuffer Threaded Rod (Item #600-961)
|
|
| Hydraulic Stuffer Piston Bolts (Item #699-462) Package of eight bolts will fit 30-50-70lb stuffer piston.
|
| 50 & 70lb. Hydraulic Stuffer Capacitor (Item #699-480) 150 V. ac 500 Mfd
|
|
| 110v Hydraulic Stuffer Motor (Item #699-484) Fits 70lb Hydraulic Stuffer and newer ProProcessor 50 lb. stuffers.
|
|
| Hydraulic Sausage Stuffer Fan (Item #602-044) Will fit Pro Processor 30lb., 50lb., and 70lb. Hydraulic Sausage Stuffer. Fan is for cooling.
|
|
| Hydraulic Sausage Stuffer 70lb Lid Ring
(Item #699-454) Seals the top and bottom of the Stainless Steel Cylinder on the 70lb Hydraulic Sausage Stuffer #600-556
|
|
| Hydraulic Stuffer 70lb Piston O-ring
(Item #699-455) Fits Hydraulic Sausage Stuffer #600-556 Will also fit the 70lb. SF350.
|
|
| 70lb Hydraulic Stuffer Aluminum Lid (Item #600-928)
|
|
| SS swivel lid 70lb stuffer (Item #618-433) Makes life so much simpler to just swivel the lid and not look for a place to put it!
|
|
| Hydraulic Stuffer 70lb. Stainless Steel Lid (Item #600-905)
|
|
| 30 AMP Breaker for Hydraulic Stuffer (Item #602-031) 30 AMP Breaker for 50lb. and 70lb. Hydraulic Stuffers with a 1100 watt motor.
|
|
| 70lb. Hydraulic Stuffer Canister SS (Item #600-922) Fits ProProcessor 70 lb. and SF350 Sausage Stuffers Approx. 12.5" o.d.
|
|
| Hydraulic Stuffer 70lb. Piston (Item #699-461) Fits ProProcessor 70 lb. and SF350 Sausage Stuffers Approx. 12.5" i.d.
|
 | Hydraulic Stuffer 70lb. Piston Metal Base (Item #699-493) Metal Base for attaching plastic piston. Screws into top of hydraulic cylinder rod
|
|
| Hydraulic Cylinder for 50lb or 70lb Stuffer (Item #699-495)
|
|
| Hydraulic Stuffer Piston Bolts (Item #699-462) Package of eight bolts will fit 30-50-70lb stuffer piston.
|
|
| Hydraulic 50 - 70 lb. Sausage Stuffer Threaded Rod (Item #600-961)
|
| Hydraulic Stainless Steel Sausage Stuffing Tube (Item #700-290) Stainless Steel Stuffing Tube in diameter 1 1/4" or 32 mm and is 16 1/2" long. This tube is made to fit the Pro Processor 100 lb. Hydraulic Sausage Stuffer (Item# 600-960)
|
| Hydraulic Stainless Steel Sausage Stuffing Tube (Item #700-291) Stainless Steel Stuffing Tube in diameter 1" or 25 mm and is 16 1/2" long. This tube is made to fit the Pro Processor 100 lb. Hydraulic Sausage Stuffer (Item# 600-960).
|
| Hydraulic Stainless Steel Sausage Stuffing Tube (Item #700-292) Stainless Steel Stuffing Tube in diameter 3/4" or 19 mm and is 16 1/2" long. This tube is made to fit the Pro Processor 100 lb. Hydraulic Sausage Stuffer (Item# 600-960).
|
| Hydraulic Stainless Steel Sausage Stuffing Tube (Item #700-293) Stainless Steel Stuffing Tube in diameter 5/8" or 16 mm and is 16 1/2" long. This tube is made to fit the Pro Processor 100 lb. Hydraulic Sausage Stuffer (Item# 600-960).
|
| Hydraulic Stainless Steel Sausage Stuffing Tube (Item #700-294) Stainless Steel Stuffing Tube in diameter 1/2" or 12 mm and is 16 " long. This tube is made to fit the Pro Processor 100 lb. Hydraulic Sausage Stuffer (Item# 600-960).
|
 | Lid Ring for 100 lb Hydraulic Sausage Stuffer (Item #699-001)
|
 | O-ring for 100 lb Hydraulic Sausage Stuffer (Item #699-002)
|
 | Hydraulic Stuffing Tube for Talsa Hydraulic Sausage Stuffer 12mm (Item #618-510) This is a stuffing tube for a Talsa hydraulic sausage stuffer. 1/2 in Dia. 11" Long. 12mm.
|
|
| Hydraulic Stuffing Tube for Talsa Hydraulic Sausage Stuffer 20mm (Item #618-511) This is a stuffing tube for a Talsa hydraulic sausage stuffer. 3/4" Dia. 11" Long. 20mm.
|
|
| Hydraulic Stuffing Tube for Talsa Hydraulic Sausage Stuffer 30mm (Item #618-512) This is a stuffing tube for a Talsa hydraulic sausage stuffer. 1 1/4" Dia. 11" Long. 30mm.
|
| Talsa Portioner (Item #600-929) Portioning Device for Talsa Sausage Stuffers Will put a measured amount out each time. Can only be used on Talsa Stuffers All Stainless Steel
|
